# Siemens and Schneider Patch Critical ICS Flaws — October 2024

> Siemens, Schneider Electric, and Rockwell Automation release critical updates for ICS products including SCALANCE, SINEC, and EcoStruxure platforms.

- Published: 2026-07-15T10:07:48.000Z
- Severity: high
- Category: Vulnerabilities
- Tags: Siemens, Schneider Electric, Rockwell Automation, ICS Security, SCADA, CVE-2024-42359, CVE-2024-38311
- Author: Runtime Rebel Intel
- Primary source: https://www.securityweek.com/ics-patch-tuesday-vulnerabilities-fixed-by-siemens-schneider-rockwell/
- Canonical: https://runtimerebel.com/blog/siemens-and-schneider-patch-critical-ics-flaws-october-2024

## Key points

- Industrial control environments face unauthorized access and denial-of-service risks due to newly disclosed vulnerabilities in core Siemens and Schneider Electric products.
- Impacted platforms include Siemens SINEC Security Monitor, SCALANCE routers, and Schneider Electric EcoStruxure Control Expert and Process Expert software suites.
- Administrators must prioritize applying firmware updates and software patches to prevent exploitation of industrial networking and control logic systems.

The industrial sector saw a significant wave of security updates this October as major vendors Siemens, Schneider Electric, and Rockwell Automation addressed dozens of vulnerabilities across their industrial control systems (ICS) and SCADA portfolios. According to [SecurityWeek](https://www.securityweek.com/ics-patch-tuesday-vulnerabilities-fixed-by-siemens-schneider-rockwell/), these releases coincide with advisories from the Cybersecurity and Infrastructure Security Agency (CISA) and VDE CERT, highlighting the ongoing effort to secure critical infrastructure against emerging threats.

## Siemens SINEC Security Monitor and Network Infrastructure
Siemens released 13 new advisories covering more than 40 individual [CVE](/glossary#cve) entries. A primary focus for [SOC](/glossary#soc) teams should be the vulnerabilities affecting the SINEC Security Monitor. Specifically, [CVE-2024-42359](https://nvd.nist.gov/vuln/detail/CVE-2024-42359) stands out as a high-severity flaw that could allow an attacker to bypass authentication under certain conditions. Implementing **Siemens SINEC Security Monitor authentication bypass mitigation** requires updating to the latest version to ensure that access controls are strictly enforced across the monitoring environment.

Additionally, the SCALANCE LPE9403 and the Simatic S7-1500 CPU families were addressed in this patching cycle. For the Simatic S7-1500, Siemens patched [CVE-2024-38311](https://nvd.nist.gov/vuln/detail/CVE-2024-38311), which could lead to a [DDoS](/glossary#ddos) condition if an attacker sends specially crafted packets to the device. Defenders looking for **how to detect CVE-2024-42359 exploit** or similar network-based attacks should prioritize monitoring traffic directed at industrial management ports and look for anomalous authentication requests in system logs.

### Schneider Electric EcoStruxure and SCADA Vulnerabilities
Schneider Electric issued five advisories covering several of its flagship automation products. The vulnerabilities impact the EcoStruxure Control Expert, EcoStruxure Process Expert, and the legacy Citect SCADA systems. These flaws often involve memory corruption and buffer overflows, which are classic vectors for achieving [RCE](/glossary#rce) in binary-heavy industrial applications.

Specifically, the **Schneider Electric EcoStruxure Control Expert patch guidance** emphasizes that these vulnerabilities could be triggered when a user is tricked into opening a malicious project file. This highlights the risk of [Phishing](/glossary#phishing) or social engineering being used to compromise engineering workstations. If successfully exploited, an attacker could gain unauthorized control over the logic executed by Programmable Logic Controllers (PLCs) on the factory floor, leading to potential physical consequences.

## Rockwell Automation Information Disclosure
Rockwell Automation published two advisories concerning its FactoryTalk suite. The most notable is [CVE-2024-9118](https://nvd.nist.gov/vuln/detail/CVE-2024-9118), which affects FactoryTalk View Site Edition. This vulnerability allows for information disclosure, potentially giving an attacker insight into system configurations or user credentials that could facilitate [Privilege Escalation](/glossary#privilege-escalation) within the industrial environment. Similarly, FactoryTalk View ME was patched for [CVE-2024-9117](https://nvd.nist.gov/vuln/detail/CVE-2024-9117), another information disclosure flaw. While these vulnerabilities may not lead directly to [RCE](/glossary#rce), they are frequently utilized as stepping stones for [Lateral Movement](/glossary#lateral-movement) across the OT network.

### Strategic Recommendations for OT Defenders
Managing [CVE](/glossary#cve) remediation in an industrial environment is notoriously complex due to strict uptime requirements and the physical risk of downtime. However, the [CVSS](/glossary#cvss) scores associated with these Patch Tuesday releases suggest that exposure risk is significant. Organizations should integrate these findings into their [SIEM](/glossary#siem) for better visibility into their OT posture.

1. **Prioritize Edge Devices:** Address vulnerabilities in SCALANCE routers and SINEC monitors first, as these often serve as the gateway between IT and OT networks and are more likely to be reachable by external attackers.
2. **Validate Integrity of Project Files:** Ensure that engineering workstations are isolated and that any project files imported into EcoStruxure Control Expert are from trusted sources to prevent workstation compromise.
3. **Implement Network Segmentation:** Restrict access to the management interfaces of S7-1500 CPUs to known, authorized workstations to mitigate the risk of network-based DoS attacks.

By adhering to a [Zero Trust](/glossary#zero-trust) architecture, defenders can limit the impact of any single compromised component. The high volume of vulnerabilities across Siemens and Schneider Electric products underscores the necessity of a rigorous, scheduled patching cycle for industrial assets to maintain operational resilience.

**Related:** [CVE-2026-6332: Schneider Electric EcoStruxure HVAC Source Code Disclosure](/blog/cve-2026-6332-schneider-electric-ecostruxure-hvac-source-code-disclosure), [AI-Driven Cyberattack Fails to Breach OT Systems via SCADA Login](/blog/ai-driven-cyberattack-fails-to-breach-ot-systems-via-scada-login)

---

AI-generated analysis from the primary source above; not human-reviewed before publication — verify anything operational against the original (https://runtimerebel.com/editorial). Quote with attribution and a link to the canonical URL: https://runtimerebel.com/blog/siemens-and-schneider-patch-critical-ics-flaws-october-2024